Bulk Cables  |  Microphone Cable

balanced, 4-wires, crossover, studio



SOMMER CABLE - SC-SQUARE 4-CORE MKII HIGHFLEX



mobilestudioinstallationHiFi

analogOFC



The sound director...

sets the tone and our cable is the same kind of “show-off“. The SC-SQUARE is a top microphone cable with great extravagance. Two wires are paired for optimum sound. This improves the capacitive values. In studios the cable is especially used to provide phantom power or for noise suppression (here the connection should be crossed over, opposite wires RED/WHITE and BLUE/YELLOW are paired). Dense spiral shielding and an additional metalic fleece foil guarantee superior protection. Because of the complicated, precise construction this cable can often be found in highly demanding HiFi-studios. A highly valued cable because of its homogenous linear sound image.
If you do not want to compromise on sound and “electrics“ in the studio, then this is your cable!

THE ADVANTAGES:

  • Extremely noise-free due to the crossover connection of 4 individual wires
  • Suitable as a phantom power supply and stereo cable due to the use of 2 additional conductor wires
  • Very good transmission safety and linear sound transmission
  • Extremely robust and good tensile strength due to the thick PVC-jacket
  • 100 % Shielding due to dense copper spiral shielding and additional fleece foil


THE APPLICATION:

  • Professional studio and microphone technology
  • Connection of effect and control units needing a return signal
  • Professional MIDI-technology transmission cable
  • High end connection of HiFi-units



TECHNICAL DATA:
Construction(4LI2Y0,20mm2)(ST)DY
Jacket, diameterPVC 0000 x .26 inch
AWG24
No. of inner conductors4 x .2 mm2
Copper strand per conductor102 x .0020 inch
Conductor insulationPE
Shieldingcopper spiral shielding + conductive fleece-foil
Shielding factor100 %
Temperature rangemin. -13 °F
Temperature rangemax. 158 °F
Fire load per inch.067 kWh
Weight per 1000 ft35.5 lbs
Packaging328/1640 ft roll
Colorblack

ELECTRICAL DATA:
Capac. cond./cond. per 1 ft19.8 pF
Capac. cond./cond. per 1 ft(Crossover) 11.9 pF
Capac. cond./shield. per 1 ft36.6 pF
Capac. cond./shield. per 1 ft(Crossover) 23.8 pF
Cond. resistance per 1000 ft< 29.9 Ohm
Shield. resistance per 1000 ft< 6.1 Ohm
Insulat. resistance per 1000 ft> 61.0 MOhm
Surge impedance< 95 Ohm

ORDER DATA:
Order No.200-0301
Rec. priceon request



v2010-JUN-14